New York 121 D2

This new cabinet sounds deeper and warmer than the other 1x12" cabs thanks to its more 
generous dimensions, whilst remaining light and portable. Plus, it features a 1" voice coil tweeter 
in straight position with incredible clarity and definition.
 New York 121 D2 is a great choice for 12" lovers that also like to have full sound and old-school vibes.
 Highs are sweet and round, the upper mids have loads of presence, and the low mids have a warmth 
that sweeps evenly into a solid bottom end. Furthermore, its size perfectly stacks with our New York 151 
cabinet allowing for new speaker configuration stack options.

> WARM, FULL TONE
Larger size of NEW YORK121 D2 gives a punchy, full and deep tone, as if the speaker was much bigger than 12".

> 1" VOICE COIL TWEETER / TWEETER LEVEL CONTROL
The 1" voice coil tweeter in straight position gives sweet and round highs, with incredible definition and clear 
tone and not at all harsh at higher volumes. As for other Markbass cabinets there's a tweeter level attenuator 
conveniently located on the side of NEW YORK121 D2. This allows you to control the tweeter output as you 
stand in front of the cabinet to listen to the sound.

> LIGHT WEIGHT
Weighing in at a mere 15.8 Kg this cabinet it's another easy 'one man lift' – in fact it can be put in a bass 
bag on your back with all the leads in, amp head in one hand and pretty much the cabinet in the other.

> FITS PERFECTLY WHEN STACKED WITH NEW YORK 151
This cabinet stacks with the New York 151 cabinet, offering new speaker configuration stack options.

> PERFECT CHOICE FOR DOUBLERS
This exceptional cabinet is perfect with electric bass, but it's also ideal for double bass and acoustic bass 
since the sound of acoustic instruments is accurately reproduced by this amazing cabinet.

Speaker Size: 1 x 12”
Tweeter: 1" voice coil tweeter
CAB Power Handling (AES Standard): 400W RMS
Crossover Frequency: 3.5 kHz
Frequency Responce: 41Hz to 20KHz
Sensitivity: 99 dB SPL
Impedance: 8 ohms
Tuned Port: Rear
Dimensions: 18.3”/ 46.4 cm (w); 18.3”/ 46.4 cm (h); 18.9 / 48 cm(d)
Weight: 34.9 lbs / 15.8 kg

Little Mark Rack Ears (with screws included) fits the following Little Mark Heads:
Little Mark III
Little Mark Rocker 500
Little Mark Tube
Little Mark Tube 800
Little Mark 800
Little Mark 250 / Little Mark 250 Black Line
Little Mark II
LMK
Little Mark Ninja
Little Marcus 250
Little Marcus
Little Marcus 800
Little Marcus 1000
Little Mark Vintage

With his distintive bass sound, Markbass top-artist Andrew Gouche has made an indelible mark on the history of 
Gospel and R&B music, inspiring today's generation of bassists. Following the amazing success of his Little AG 
1000 gignature amp we are now introducing this 58R version, powered by our 500W MPT proprietary amp. Just like 
the other amps in our 58R range, the amp new design features all the connections and controls on the front panel 
leaving only the speaker outs and AC power socket on the rear panel, offering optimal ergonomics and making 
everything more practical. All in an high build quality and ultralight new chassis for a super portable 
package that weights only 2,17Kg.

ANDREW GOUCHE'S SIGNATURE SOUND
We created this amplifier to suit Andrew's individual requirements for both sound, and playing style. Thanks to 
his exceptional music production experience and finely tuned musical ear, the development process was rapid and 
precise. With Andrew's deep knowledge of what makes a great bass sound, we customised frequency choices based on 
his direction and he stamped it with
his seal of approval - "Finally I have MY sound!".

NEW HEAD ERGONOMIC AND PRATICAL DESIGN
The new LITTLE AG 58R head amp design features all the connections and controls on the front panel leaving only 
the speaker outs and AC power socket on the rear panel, offering optimal ergonomics and making everything more 
practical.

LIMITER CONTROL
This dedicated limiter control enables a modern amp response when fully dialled in. In contrast when set to zero 
it creates that old generation behavior along with the typical distortion you can get when the limiter effect is 
really low. Of course you can also select everything in between to create your own individual amplifier 
characteristic response.

FSW MUTE / EQ ON/OFF
Featured on the front panel of the Little AG 58R amplifier is a convenient mute switch. In addition with an 
optional dual footswitch (FSW) you can remotely trigger the mute function, and also turn the EQ section on/off.

MPT - Mark Proprietary Technology
Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, 
Marco De Virgiliis invested heavily in R&D to develop proprietary power amp technology in house. Our MPT power 
amp was built from the ground up to respect and elevate the inherent tone of your instrument.

ECO-FRIENDLY
It's time to think about the future; focus on the product and on the natural environment that surrounds it.

Preamp: 	Solid State
Power Amp: 	MPT (MARK PROPRIETARY TECHNOLOGY)

EQ:		ULTRALOW: level ±16 dB (freq. 65 Hz)
		LOW: level ±16 dB (freq. 100 Hz)
		MID: level ±16 dB (freq. 500 Hz)
		HIGH MID: level ±16 dB (freq. 1.4 KHz)
		HIGH: level ±16 dB (freq. 6 Khz)

Other features:	XLR Line Out with Level Control and
		Pre/Post EQ and GND Lift switches
		BI-BAND LIMITER | MUTE switch
		FX Send/Return | Tuner Out
		Footswitch (optional) for MUTE and EQ ON/OFF

Dimensions:	27.6 cm (w)8.3 cm (h)25.6 cm(d)

Weight: 2,17 kg

The One and Only Blues Harp
The name evokes the typical blues sound. It is a metaphor for whiskey bars, 
juke joints, and good times; synonymous with wide plains, open fields, 
and pilgrimage: The Blues Harp®. For over 50 years, the harmonica has shaped
the sound of blues, rock, and sometimes even folk. 
The Blues Harp® is designed for this specific blues sound, but thanks 
to the modular system it can easily be adjusted and changed to anything 
you want it to be – easy, quickly, at any time. 
Whether you’re a beginner or advanced, the Blues Harp® is the harp 
for you.

Modular construction
The comb, reed and cover plates are interchangeable with all other MS series 
for many possible combinations that suit your playing style


TECHNICAL DETAILS
Reed plates (material, thickness): 	brass, 0.9 mm
Reed plates (surface): 			brass
Reeds (number, material): 		20, brass
Comb (material, color): 		doussie, brown
Comb (finish): 				double lacquered
Mouthpiece (surface): 			doussie
Cover plates: 				stainless steel
Keys: 					F#, F, E, Eb, D, Db, C, B(H), Bb, A, Ab, G
Type: 					diatonic
Tuning: 				Richter
Number of holes: 			10
Tonal range *: 				3 octaves
Length: 				10.5 cm / 4.1"