New York 121 D2

This new cabinet sounds deeper and warmer than the other 1x12" cabs thanks to its more 
generous dimensions, whilst remaining light and portable. Plus, it features a 1" voice coil tweeter 
in straight position with incredible clarity and definition.
 New York 121 D2 is a great choice for 12" lovers that also like to have full sound and old-school vibes.
 Highs are sweet and round, the upper mids have loads of presence, and the low mids have a warmth 
that sweeps evenly into a solid bottom end. Furthermore, its size perfectly stacks with our New York 151 
cabinet allowing for new speaker configuration stack options.

> WARM, FULL TONE
Larger size of NEW YORK121 D2 gives a punchy, full and deep tone, as if the speaker was much bigger than 12".

> 1" VOICE COIL TWEETER / TWEETER LEVEL CONTROL
The 1" voice coil tweeter in straight position gives sweet and round highs, with incredible definition and clear 
tone and not at all harsh at higher volumes. As for other Markbass cabinets there's a tweeter level attenuator 
conveniently located on the side of NEW YORK121 D2. This allows you to control the tweeter output as you 
stand in front of the cabinet to listen to the sound.

> LIGHT WEIGHT
Weighing in at a mere 15.8 Kg this cabinet it's another easy 'one man lift' – in fact it can be put in a bass 
bag on your back with all the leads in, amp head in one hand and pretty much the cabinet in the other.

> FITS PERFECTLY WHEN STACKED WITH NEW YORK 151
This cabinet stacks with the New York 151 cabinet, offering new speaker configuration stack options.

> PERFECT CHOICE FOR DOUBLERS
This exceptional cabinet is perfect with electric bass, but it's also ideal for double bass and acoustic bass 
since the sound of acoustic instruments is accurately reproduced by this amazing cabinet.

Speaker Size: 1 x 12”
Tweeter: 1" voice coil tweeter
CAB Power Handling (AES Standard): 400W RMS
Crossover Frequency: 3.5 kHz
Frequency Responce: 41Hz to 20KHz
Sensitivity: 99 dB SPL
Impedance: 8 ohms
Tuned Port: Rear
Dimensions: 18.3”/ 46.4 cm (w); 18.3”/ 46.4 cm (h); 18.9 / 48 cm(d)
Weight: 34.9 lbs / 15.8 kg

The One and Only Blues Harp
The name evokes the typical blues sound. It is a metaphor for whiskey bars, 
juke joints, and good times; synonymous with wide plains, open fields, 
and pilgrimage: The Blues Harp®. For over 50 years, the harmonica has shaped
the sound of blues, rock, and sometimes even folk. 
The Blues Harp® is designed for this specific blues sound, but thanks 
to the modular system it can easily be adjusted and changed to anything 
you want it to be – easy, quickly, at any time. 
Whether you’re a beginner or advanced, the Blues Harp® is the harp 
for you.

Modular construction
The comb, reed and cover plates are interchangeable with all other MS series 
for many possible combinations that suit your playing style


TECHNICAL DETAILS
Reed plates (material, thickness): 	brass, 0.9 mm
Reed plates (surface): 			brass
Reeds (number, material): 		20, brass
Comb (material, color): 		doussie, brown
Comb (finish): 				double lacquered
Mouthpiece (surface): 			doussie
Cover plates: 				stainless steel
Keys: 					F#, F, E, Eb, D, Db, C, B(H), Bb, A, Ab, G
Type: 					diatonic
Tuning: 				Richter
Number of holes: 			10
Tonal range *: 				3 octaves
Length: 				10.5 cm / 4.1"